Suitable for: Langstroth 1/1, DNM/EHM, DNM shallow/EHM shallow, Langstroth honey super, Zander, Zander shallow, Austrian wide comb, Kuntzsch wide, Gerstung, etc. — for frames up to 14–26 cm in height and top-bar length up to 48 cm.

32-frame radial honey extractor with 370 W / 230 V motor drive, fully automatic control and integrated safety device that automatically switches off the motor when the lid is opened. State-of-the-art engineering enables an innovative design of the extractor floor. The bottom of the tank is welded seamless and sloped toward the outlet. The extractor is equipped with two stainless steel pinch valves (6/4'' and 2''). The 2'' pinch valve is installed at the lowest possible point so that all honey can flow out of the extractor. All parts of the extractor that come into contact with honey are made from food-grade materials. The lid is made of transparent acrylic glass.

Frames do not need to be turned during extraction — the centrifugal force together with the natural tilt of the cells ensures simultaneous emptying of both sides of the frames.

The extractor is disassemblable and can therefore be easily transported through a door frame 80 cm wide.

Allows extraction of 32 frames with a height of 14–26 cm and a top-bar length of up to 48 cm.

The fully automatic controller runs the entire extraction process independently, allowing you to attend to other tasks while it operates. Operation is simple via a membrane keypad and a two-line digital LCD display. You can set and save up to 8 different programs. Each program can be configured with up to 8 different durations, directions and rotation speeds. Basic programs are pre-set but can be changed, expanded and re-saved at any time.

Compact design, quiet operation and reliable performance. Warranty: 2 years.

Optional accessories:

• Voltage converter 12V DC–230V AC, 600W (for operation from a 12V battery): Art. No. 4627
• Bottom heater for extractor Ø 95–110 cm including installation – recommended for faster honey flow, quicker filtering and easier cleaning: Art. No. 7126
• Conversion of the radial extraction basket into a tangential basket using hanging grids (4 pcs) – allows extraction of four large frames up to 30 cm height: Art. No. 7761. In this case a hanging bag for cappings can be attached: Art. No. 7758
• Rubber pads for the feet to reduce slipping: Art. No. 7769

Technical data

• Type: LTA 32SR
• Drive: fully automatic program control with 370 W / 230 V motor; integrated safety cut-off when lid is opened
• Capacity: 32 frames (standard / shallow 32/32)
• Suitable for: Langstroth 1/1; DNM/EHM; DNM shallow/EHM shallow; Langstroth honey super; Zander; Zander shallow; Austrian wide comb; Kuntzsch wide; Gerstung and many more
• Maximum frame size: up to 26 x 48 cm (height x top-bar length)
• Tank diameter (inside/outside): 95 / 98 cm
• Heights: overall height with feet / with drive = 112 / 132 cm; tank height without/with drive = 74 / 94 cm; height from floor to honey tap = 37 cm
• Honey valves: 1 × Ø 42 mm + 1 × Ø 53 mm; honey valve welded at the lowest possible point
• Bottom: seamless welded and sloped toward the pinch valve
• Tank: internal diameter 95 cm
• Made in EU (Slovenia)
• Material: stainless steel W.Nr. 1.4301 / AISI 304
• Extractor type: radial extractor
• Warranty: 2 years