Suitable for: Langstroth 1/1, DNM/EHM (including shallow), Langstroth honey super, Zander (including shallow) and up to 8 frames up to 11 cm high. Max. frame size: 23 x 48 cm.

Cassette size: 24 x 40 x 4.5 cm
Drive: motor 110 W / 230 V
Inner diameter of the bowl: 63 cm

4-frame self-reversing honey extractor with 110 W / 230 V motor drive and an integrated safety switch that automatically stops the motor when the lid is opened. The control lever allows stepless speed regulation between 0 and 280 revolutions per minute and selection of left or right rotation. State-of-the-art engineering has enabled an innovative design of the extractor bottom. The bowl is welded seamlessly and sloped toward the outlet. The stainless squeeze valve is welded at the lowest possible point to ensure all honey can drain from the extractor. All parts that come into contact with honey are made from food-grade materials. The lid is mounted with special hinges and made of transparent acrylic so the extraction process can be monitored. The special foot construction provides reliable stability for the extractor.

The frame pockets are made from vertical grid rods with optimized spacing so neither combs nor frames are damaged during extraction. They are connected to each other by a special mechanism. The frame pockets prevent honey from accumulating inside them during extraction. As a result, the frames are completely dry after spinning.

Allows extraction of 4 frames up to a height of 23 cm and a top bar length of 48 cm.

Warranty: 1 year

Optional accessories:
• Fitting rubber pads (Art. No. 7754) to the extractor feet reduces slipping.
• Bottom heater for extractor Ø 63 cm including installation – our recommendation for faster draining of honey from the extractor, quicker straining, and easier cleaning, Art. No. 7127.
• If 230 V mains are not available, the voltage converter 12V DC–230V AC, 300 W (Art. No. 4626) allows operation of the extractor from a 12 V battery/accumulator.
• Art. No. P495.009, brackets for smaller frames (e.g. DNM/EHM size)

Technical data:

• Type: LTM 4SS – M
• Material: stainless steel W.Nr. 1.4301 / AISI 304
• Drive: motor 110 W / 230 V with integrated safety switch; stepless control 0–280 rpm; left and right rotation
• Number of frames: 4 (full-size) / 4 (shallow)
• Suitable for: Langstroth 1/1, DNM/EHM (including shallow), Langstroth honey super, Zander (including shallow) and up to 8 frames up to 11 cm high. Max. frame size: 23 x 48 cm
• Cassette size: 24 x 40 x 4.5 cm
• Bowl diameter (inside/outside): 63 / 66 cm
• Heights: bowl height without/with drive: 70 / 82 cm; overall height with feet / with drive: 111 / 123 cm; height from floor to honey tap: 40 cm
• Honey tap: welded at the lowest possible point; 1x Ø 38 mm
• Bottom: seamless welded and sloped toward the honey tap
• Handles: two side handles
• Cassette pockets: vertical grid rods with optimized spacing to protect combs and frames
• Made in EU (Slovenia)
• Warranty: 1 year