Suitable for: Dadant Blatt (honey super & brood chamber), Zander 1.5 / Zander Jumbo and Type CS. Maximum frame: 34 x 48 cm (top-bar length 48 cm).

Pocket size: 35 x 40 x 4.5 cm
Drive: Motor drive 750 W / 230 V with fully automatic control
Inner diameter of the tank: 110 cm

8-frame self-turning honey extractor with 750 W / 230 V motor drive, fully automatic control and integrated safety device that automatically stops the motor when the lid is opened. State-of-the-art engineering has allowed an innovative design of the extractor floor. The bottom of the tank is welded seamless. The extractor is fitted with two stainless steel pinch valves (2"). The lower valve is installed at the lowest possible point so that all honey can drain from the extractor. All parts that come into contact with honey are made from food-grade materials. The lid is made of transparent acrylic.

The frame cages are made from vertical mesh bars with appropriate spacing so that frames are not damaged during extraction. They are connected by a special mechanism. The cages prevent honey from pooling inside them during extraction, therefore the frames come out dry. For an additional charge, cages can be made for frames up to 37 cm high.

The extractor is disassemblable and can therefore be easily transported through an 80 cm wide door frame.

Allows extraction of 8 frames up to 34 cm high or 16 shallow frames up to 17 cm high with a top-bar length of 48 cm.

The fully automatic control allows the entire extraction process to run unattended so you can attend to other tasks in the meantime. Operation is simple via a membrane keypad and a digital two-line LCD display. You can set and save up to 8 different programs. Each program can be configured with up to 8 different times, directions and rotational speeds. Basic extraction programs are pre-set but can be changed, expanded and re-saved at any time.
Compact design, quiet operation and reliable performance.

Warranty: 2 years

Additional equipment:
• Bottom heater for extractor ø 95-110 cm including installation – our recommendation for faster draining of honey from the extractor, quicker filtering and easier cleaning, Art. No. 7126
• Fitting rubber pads (Art. No. 7769) to the extractor feet reduces slipping.

Technical data:

• Drive: Programmed fully automatic control with motor 750 W / 230 V
• Number of frames (deep / shallow): 8 / 8 (also 16 shallow possible by halving the height)
• Suitable for: Dadant Blatt (honey super & brood chamber), Zander 1.5 / Zander Jumbo, Type CS
• Max. frame: 34 x 48 cm (top-bar length 48 cm)
• Pocket size: 35 x 40 x 4.5 cm
• Tank diameter (inside / outside): 110 / 117 cm
• Floor: seamless welded and inclined toward the drain; 2 pinch valves (2")
• Inner diameter of the tank: 110 cm
• Material: Stainless steel W.Nr. 1.4301 / AISI 304
• Made in EU (Slovenia)
• Warranty: 2 years
• Type: LTA 8SS-V