Suitable for: Langstroth 1/1, DNM/EHM, DNM shallow/EHM shallow and Langstroth honey super. Maximum frame size: 23.5 × 48 cm. Capacity: 12 frames (height 14–22 cm) or 8 frames (height 14–24 cm, top-bar length 48 cm).

CAPACITY: 12 frames with a height of 14–22 cm OR 8 frames with a height of 14–24 cm
DRIVE: Motor drive 110 W / 230 V with fully automatic control
INNER DIAMETER of the tank: 63 cm

12-frame radial honey extractor from Logar, with 110 W / 230 V motor drive, fully electronic control and an integrated safety switch that automatically stops the motor when the lid is opened. State-of-the-art engineering has enabled an innovative design of the extractor bottom: the tank is seamless-welded and slopes toward the outlet. The stainless-steel honey gate is welded at the lowest possible point so that all honey can drain out of the extractor. All parts that come into contact with honey are made from food-grade materials. The lid is made of transparent acrylic. A specially designed set of feet ensures stable support for the extractor.

Frames do not need to be turned during extraction, because centrifugal force together with the natural tilt of the cells allows both sides of the frames to be emptied simultaneously.

The fully electronic control enables the entire extraction process to run automatically, allowing you to attend to other tasks while it operates. Operation is simple via a membrane keypad and a digital two-line LCD display. You can program and store up to 8 different programs, each with up to 8 time intervals, directions and rotational speeds. Basic programs are pre-set and can be adjusted at any time.

Compact design, quiet operation and reliable performance. Warranty: 2 years.

Optional accessories:
- The radial basket can be converted to a tangential basket by inserting four additional hanger-grids for tangential operation (Item No. 7761), allowing extraction of four large frames up to 30 cm in height. In this configuration a hanger pocket for capping wax (Item No. 7758) can be used so that honey from the cappings can flow out.
- Rubber pads for the feet (Item No. 7754) reduce slipping of the extractor.
- Bottom heater for 63 cm extractor including installation – recommended for faster honey flow, quicker straining and easier cleaning (Item No. 7127).
- If 230 V is not available: Voltage inverter 12 V DC → 230 V AC, 300 W (Item No. 4626) for use with a 12 V battery/accumulator.

Logar radial extractor features: high-quality stainless-steel construction, seamless-welded tank, deeply welded honey gate, fully electronic control with programmable memory and safety shut-off on the lid. Ideal for beekeepers seeking efficient, hygienic and reliable honey processing.

Technical data:

• Drive: fully automatic program control with 110 W / 230 V motor
• Number of frames (standard / shallow): 8 / 12 — Capacity: 12 frames (height 14–22 cm) or 8 frames (height 14–24 cm, top-bar length 48 cm)
• Maximum frame size: 23.5 × 48 cm
• Suitable for: Langstroth 1/1, DNM / EHM, DNM shallow / EHM shallow, Langstroth honey super
• Bottom: seamless-welded and sloped toward the honey gate
• Honey gate: welded at the lowest possible point
• Handles: two side handles
• Tank diameter (inside / outside): 63 / 66 cm
• Material: Stainless steel W.Nr. 1.4301 / AISI 304
• Extractor type: radial
• Model: LTA 12SR
• Warranty: 2 years
• Made in EU (Slovenia)